RED DSMC2 I/O Housing


Water Housing with In/Out capabilities for RED Raven, Scarlet-W & DSMC2 Cameras.


2 in stock (can be backordered)


Leak Detection System

Vivid Leak Sentinel V5 + Electric Pump


Bulkheads for I/O

Categories: ,



  • CNC machined aluminium housing shell
  • Custom colour
  • CNC machined aluminium base plate and stainless mounting hardware
  • CNC machined aluminium dual handle video grips with ODI VANS grips (various colours available)
  • ‘STANDARD’ port base
  • Housing care kit (silicone grease, spare wingnuts, Allen keys)


  • Front record button
  • Custom button 1
  • Custom button 2
  • Sidekick control panel included


CNC machined from 6061 billet aluminium then anodised and painted. All buttons and hardware are 316 stainless steel, providing superior corrosion resistance.

This housing is rear loading, meaning the camera is installed from the rear of the housing, with recessed bolt closure.


Camera Configuration

Our RED I/O housing is optimised for the following camera configuration:

  • RED DSMC2 Brain
  • RED DSMC2 V-Lock I/O Module
  • Various monitor options (see below)
  • V-lock battery no more than 60mm thickness, and protrudes no more than 20mm above the top of the camera. Dynocore DM-155S are a perfect fit.
  • RED DSMC2 Sidekick (optional)


Monitor Options

The housing allows for various monitor options, depending on your requirements.

Options include:

The RED monitors require the use of Wooden Camera Pogo cables.


RED Lemo A adapter does not fit inside the housing.

Instead of Lemo A for the RED PRO TOUCH 7.0″ LCD, use this cable:

RED® Male Pogo to Male LCD/EVF Cable (12in/30cm, RED® DSMC2™)


For the DSMC2 RED TOUCH 4.7″ LCD use this cable:

RED Male Pogo to Female Pogo LCD/EVF Cable (12″, RED DSMC2)


The 503UB requires a 90degree SDI cable.


I/O Capability

The housing has two M16x1 threads machined in the housing shell. These are plugged off as standard, however they allow the easy fitment of SDI and/or HDMI waterproof bulkheads, external battery inputs, as well as vacuum/ leak sensor bulkheads.

This provides opportunities for external monitoring, additional battery life, and peace-of-mind with a leak sensor.

We recommended Dive and See waterproof bulkheads and cables, as well as Vivid Sentinel leak detectors. However the industry standard thread provides mounting opportunities for a variety of bulkheads that use the M16 thread including the popular Nauticam bulkheads.

We can supply these bulkheads, cables and leak detectors pre-fitted to your housing.



Our RED DSMC2 housing ships with our ‘STANDARD’ port system, which suits lenses up to 105mm diameter, which includes most Canon SLR lenses.

We can custom build ports for almost any lens, including PL mount cinema glass.

Contact us for details on custom ports.

The front element in all our ports is user replaceable in less than 30 seconds by simply unscrewing the front locking ring and dropping in a replacement acrylic screen we offer for purchase.

So no more spending hours buffing scratched ports!



The housing ships with two side handle grips. These are CNC machined from the same aluminium the housing is built from, and offer a very comfortable ODI Vans BMX grip.

There are several grip mounting points provided on the housing, allowing users to setup the handles to suit their individual requirement. The grips can be positioned at various locations along the housing, in high-mode or low-mode, and/or offset from each other.

The grips are removable with an Allen key for easy transporting of the housing.


Accessory Mounting

The housing offers a number of 1/4-20 threads along the top and bottom edges of the housing.

These can be used to mount lightweight accessories such as a GoPro.

If you wish to mount heavy accessories, such as lighting, you will require a custom cheeseplate.

Contact us for more info.


Depth Rating: 20m/66ft

Weight: Approx. 3kg (Housing only) /  Approx. 8kg (fully setup with camera and lens).


Additional information


Single Colour